HDTVtoMPEG2 1.11.89
HDTVtoMPEG2 is primarily an MPEG-2 transport stream editor.
|
0.00 
Freeware
0K
Windows Vista 
HDTVtoMPEG2 is primarily an MPEG-2 transport stream editor. Editing is performed as a simple transport packet level cut & splice, which means the output has a transport stream discontinuity at the splice points.
Different decoders handle discontinuities with different amounts of grace. You may experience audio and/or video break-ups at the discontinuities. If you need editing with no discontinuities in the output, check out VideoReDo.
HDTVtoMPEG2 can break the output into multiple file segments. It can strip unwanted programs and PIDs from the input, and it regenerates tables. It can optionally preserve the transport stream bit rate (to keep a constant bit rate stream as such).
HDTVtoMPEG2 can scan for commercials by detecting black pillarbox bars.
INSTRUCTIONS
1. Record a program from your HiPix digital video capture card or other card.
Some digital HDTV capture cards encrypt the data they save to the hard drive. If you find this to be the case, return the card and purchase a card that does not encrypt free over the air digital programming (send a message to the manufacturer!)
2. Run the HDTVtoMPEG2 program.
3. Press the "Add" button, and find the folder where your video files are stored. The file dialog will automatically show files with a .TS or a .0 or higher extension. When you find your saved program, select all the files you wish to convert for that program by using the LEFT-MOUSEBUTTON then SHIFT-LEFT MOUSEBUTTON to select a range of files, or CTRL-LEFT MOUSEBUTTON to select multiple files one at a time. Once you have the files you wish to convert selected, click the "Open" button. All the files you have selected will be added to the "Input Files" list.
4. The "Output File" name will automatically be set to be the same name and directory as the input files, but with a ".mpg" extension and a "0" for multiple file output. You may change the name of this file, and even change the ".mpg" to ".vob" (the extension of DVD video files) if you would like. However, you must have a digit pattern "0" in the output file name if you want to convert input files into multiple output files.
5. Select the channel, or the video and audio stream id's to convert. If you select an ATSC channel, this will automatically set the Audio and video PID's, and you can then just convert the file.
If there is no channel information in the stream (i.e. HBO or satellite stream, you must set the PID numbers for the stream manually. For most digital HDTV broadcasts, this is usually 0x11 for video, and 0x14 for audio. Occasionally it will be 0x21 or 0x24. Generally the first digit of the stream is the program ID in your digital program guide, and the second digit is 1 for video or 4 for audio. A future version of HDTVtoMPEG2 will scan your files automatically and show you the streams available in them, but for right now, just do a small test to make sure you have the right ones before starting a long conversion.
6. The "MaxFileSize" number indicates how big each of the output files will be. A value of 1024 means each output file will be 1GB. If you are writing files to a DVD-R, it may be a good idea to set the output file size to 4600.
7. Press "Convert" to start the conversion. A progress dialog will indicate the current input and output files, and the progress on the current file. The progress bar will go from 0 to 100% for each input file until all files are completed. To interrupt the conversion, you can press the "Cancel" button.
If the current conversion is cancelled the current output files will still contain all of the valid video up to the point the conversion was cancelled.
tags
the output output file output files the current left mousebutton transport stream the files you have input files set the will automatically the conversion the stream
Download HDTVtoMPEG2 1.11.89
Authors software
HDTVtoMPEG2 1.11.89
Ben Cooley
HDTVtoMPEG2 is primarily an MPEG-2 transport stream editor.
Similar software
HDTVtoMPEG2 1.11.89
Ben Cooley
HDTVtoMPEG2 is primarily an MPEG-2 transport stream editor.
EasyMP3 2005 2.0.0.19
ZeuS Microsystems
EasyMP3 was created to simply encode and decode audio files.
swf >> avi Converter 1.0.2027
swf>>avi Team
swf>>avi is a free software that enables you to convert Flash .
Yamb 2.0 preview
kurtnoise
Yamb is the acronym of Yet Another Mp4Box UI.
TSConverter 2.5
DVBPortal
This program converts transport streams (TS files) into the DVR-MS file format used by Windows Media Center Edition.
PVAStrumento 2.1.0.17
Offeryn
PVAStrumento is a software utility that allows you to convert files recorded with a DVB PC-card in PVA-format to regular MPEG2 program streams.
Plato Video To PSP Converter 5.90
Plato Global Creativity
Plato Video to PSP Converter is the professional Video to PSP converter software.
Broadcaster Studio Pro 1.0
Broadcaster Interactive Group Inc.
Broadcaster StudioPRO software will let you rip, edit and rebroadcast any video stream on your screen from any media player, web browser, or your desktop with full audio.
Prism Video Converter 1.00
NCH Software
Prism is a video file converter for Windows.
Audio2VCD 2.0.0
VCDEasy
Specially designed for the VCDEasy users, Audio2VCD can convert audio files into the MPEG Audio format required by the VideoCDs (VCD and SVCD) (WAV is also available as output format).
Other software in this category
Subtitles Translator 1.7.2
Mironto
This program is intended for translating subtitles in MicroDVD format from one language to another.
Time Adjuster 3.1
Irek Zielinski
Time Adjuster is a freeware movie subtitle utility.
DVDSubber 2.0.4 (RC1d)
Gersen
DVDSubber displays subtitle tracks during playback that aren't included on the disk.
VCSwap 1.5.3.54
p.bekke
VCSwap is a tool for Hot Swapping Video Codecs.
DiVFix 1.13 beta
Budai Csaba
DiVFix lets you watch partially downloaded DivX (AVI) movies.
RSS